Journey 88 qt Kryptek Blue/Orange Cooler

Usually ships in 10 business days
(25 reviews)
Current Stock:
Minimum Purchase:
1 unit
  • Anti-slip Goat’s Feet™, keep your Cordova planted in truck beds, on boat decks or wherever you plant it. 
  • Stamped aluminum handles with integrated bottle openers and comfort foam grips are rock solid and lock in just the right position to make carrying your Cordova comfortable. 
  • Top Loader LatchesTMallow you to pack gear tight against your Cordova, and still be able to easily access its contents. 
  • The Interagency Grizzly Bear Committee certified bear-resistant lock system will keep even apex predators from getting to your ice-cold beer and ham sandwich before you do. 
  • Every Cordova Cooler comes with a Lid LockTMto keep the lid up while you are getting your goodies out. 
  • When pre-cooled, (getting the insulation in the cooler cold, which will melt your first batch of ice) the EcofoamR used in all Cordova hard side coolers is robust enough to keep your refreshments cold for days on end. 
  • From design to finished product, we take pride in the fact that our rotomolded coolers are hand crafted from start to finish in Idaho.  We also think that the best way to reduce waste is to never throw something away. Our products are made to last a lifetime. We hope and expect that our products are more likely to be passed to the next generation than to a landfill. 

CORDOVA LIMITED LIFETIME WARRANTY Cordova LLC dba Cordova Coolers warranty the Cordova Coolers Hard Sided Coolers to be free from manufactures defects in material or workmanship under normal use and service for a lifetime from the date of original purchase. WARRANTIES MUST BE REGISTERED WITHIN 30 DAYS OF ORIGINAL PURCHASE TO BE EFFECTIVE. For custom coolers the wrap/logo is not covered under the warranty terms. This is your exclusive warranty and there are no additional warranties that extend beyond the description warranty here. If warranty applies, Cordova Coolers shall either repair the product or component or provide you with a replacement product or component if proven to be defective under the terms of this warranty within the lifetime of the original purchaser. The warranty is NOT transferrable. Owners must present original proof of purchase from an Authorized Cordova Cooler dealer to obtain warranty service. Dealers, Service Centers or Retail Stores do not have the right to change the terms and conditions of the warranty. This warranty is not valid if the product or components have been: (1) used commercially (2) damaged through abuse, misuse or neglect, (3) damaged in accident (4) unreasonably used for any purpose for which it was not intended (5) repaired or altered in any way from its original configuration, (6) damaged due to any act of nature (7) purchased as a blemished cooler. Normal wear and tear, including dents, slight warping, scratches, discoloration, fading, non-sticking graphics or wear to skid pads is not covered under warranty. Loss of parts or components removed from the product is not covered under the terms of this warranty. Cordova Coolers is not responsible for incidental or consequential damage resulting from any malfunction. Cordova Coolers reserves the right to change products and designs without incurring any obligations to incorporate such changes into already completed products, or those in the possession of dealers or consumers. Coolers repaired or replaced under this warranty may or may not incorporate these changes. Repaired or replaced coolers will be same size and color as defective cooler. Please carefully review the care instruction manual for proper use and care of your Cordova Cooler. Damaged products must be returned directly to Cordova Coolers in its original box or adequate packaging, freight prepaid at customer's expense. Please include a copy of original sales receipt, the Return Authorization Number (RGA) and a description of the issue with the product. To obtain a Return Authorization Number, or to activate your warranty, visit our website at
Product Manufactured::
Proudly Made and Hand-Crafted in Idaho, USA
Interior Dimensions::
Length: 29.5" Width: 12.25" Height: 14.5"
Base Dimensions::
Length: 32" Width: 15.5"


  • 5
    Great looking cooler!

    Posted by Kyle on Aug 13th 2020

    The cooler looks great! I’m sure it will stand the test of time and keep me hydrated and fed. Cordova customer service rocks! They were very helpful.

  • 5
    Perfect Cooler

    Posted by Wally on Jul 28th 2020

    First of all, great customer service. They got the cooler to me well before my requested date. Secondly, the cooler works great. The handles are extremely durable and the cooler retains ice great. Would recommend a good alternative to Yeti.

  • 5
    Solid heavy duty product

    Posted by Randy on Jul 20th 2020

    I just received the cooler. It seems really well built. I chose Cordova because they support the NRA. Be aware that the cooler took 13 days to manufacture and ship, not 72 hours like the website says. Customer service was very helpful and answered my email with projected times. The really bad part of the purchase is that Cordova chose Fed Ex as the shipper. They were 3 days late in getting the cooler to me. This put a cloud on the entire process. If Cordova used a decent shipping company the buying experience would be world class. I still give the cooler 5 stars. I don't hold the incompetence of Fed Ex against Cordova.

  • 5
    Great cooler

    Posted by Kirk on Jul 7th 2020

    I purchased a cooler about a month ago and wanted to leave a review after using it . We used two coolers for a recent trip to the beach and had very different results. We packed the Cordova cooler with frozen food and filled with three bags of ice. We packed an Igloo cooler with drinks and also three bags of ice too. Both were placed on a rack behind our SUV and we headed out on a nine hour trip to the beach. Neither were opened on our drive and the outside temp was 90 or above. Upon our arrival, the Cordova had kept everything frozen solid with hardly any water in the bottom. The Igloo had mostly melted and the food and drinks inside were cool but not cold. After unpacking the Cordova, I filled it with bottled water and it kept them cold for four more days until the ice finally melted. I know these coolers are very different in how they are manufactured, but the Cordova was awesome. I already plan to get rid of the Igloo and get another Cordova for our next trip.

  • 5
    Excellent Cooler

    Posted by Katy on Jun 28th 2020

    We live in the boonies (45 minutes from a store, 3.5 hours to a Smith's) so a good cooler is a necessity. We grabbed a bag of ice and a couple things of icecream to see how well it worked. An hour later there was no melting of the ice, and icecream was harder than when we bought it. I can't wait to see it's performance on camping trips! Will definitely look into the big one for our elk hunting.

  • 5
    Best cooler on the market AMERICAN MADE!

    Posted by phillip leab on Jun 10th 2020

    Best cooler on the market, great price, awesome quality and number one it’s made in America by Americans! Customer service is great too! Thank you

  • 5

    Posted by Tiffany Hatfield on May 14th 2020

    This is the best cooler ever! Worth every penny!

  • 5
    Epic cooler

    Posted by Junior Carbajal on May 13th 2020

    Great quality product, built right w better features than rtic, yeti etc Easy to carry

  • 5
    Excellent USA build quality

    Posted by David Mutters on Jan 27th 2020

    Excellent USA build quality. The walls are not as thick as competition but the insulation must be better because it keeps ice longer than my friend’s grizzly and yeti. The gasket is a compression type which ensures an excellent seal. You can hear the air rush in/out when the lid is opened and closed. I love having the delrin quality drain plugs on both ends of the cooler. Plus the plugs only have to be unscrewed partially to drain (prevent losing the plug or having it fly away). Having the lid latches going upwards is much better than competitor’s downward design. My buddy has to move his cooler away from the side of his truck or trailer to reach down and unlock his latches. I can open mine without having to move the cooler. The handles are excellent quality and the built-in handles are a nice-to-have if you don’t have enough clearance on the ends. Overall, I am very satisfied with this cooler and recommend to everyone! My friends with the grizzly and yeti’s said if they did it again, they would go with Cordova’s. Built in the USA and a lifetime warranty. Can’t beat that.

  • 5

    Posted by Robert Burbank on Jan 27th 2020

    BUILT IN THE USA! I love the construction of this cooler, durable and well thought out for access. Aluminum handles that lock in place to lift the cooler will not crush your hand, however they will fold down and out of the way for storage or transporting the cooler. Super convenient having the latches designed to lock on the lid (upward design) as opposed to locking on the cooler wall (downward design). 1- While packed in a full pickup bed you still have access to opening the lid. Also they don’t get in the way when trying to close the cooler. 2 – Lid has a built in lid stop to keep it from slamming on your hand while getting into the cooler. Yes it holds Ice for multiple days. Took it on a spring bear hunt 8 days in Northern Idaho, temps during the day were average 85 F, average at night high 40’s (not crazy hot). I only used chunk ice, not blocks and my cooler was the only one with chunk ice left (competitors were, Yetti, and Cabala’s). I have sense used it on several 4 day weekend camping trips with my family and having the dividers are handy to separate foods from drinks. (Can’t wait for baskets to help keep certain food items from sitting in ice). I am very satisfied with this cooler and have had 2 other friends buy one sense seeing/using mine. I will be purchasing 2 more coolers in the smaller sizes.

  • 5

    Posted by Nicholas on Jan 27th 2020

    I do wildland fire fighting and bought a new Cordova to keep food and drinks cold in the summer heat. After a season a full season in the field you almost can’t tell it isn’t brand new! I love the solid handles and the ice retention is great

  • 5
    Exceptional Coolers

    Posted by Cecil L Kester on Jan 27th 2020

    10 day camp trip, used two medium coolers. One for food the other for drinks. Pre-chilled items place in cooler. Filled with two blocks of ice then used cubed ice to fill the space between items. The food cooler kept a roast frozen for three or four days. When I got home, in the food coolerthe ice blocks were just over half gone and there was minimal cubed ice left. The drink cooler had about a quarter of the ice blocks. May have had more ice left had I drained the water more often (only drained them once after about four days). They also say in the sun part of the day with temperatures ranging from mid 20’s to mid 30’s at night and mid 70’s to low 80’s during the day.. They are heavy if you are used to using standard plastic coolers. I wish there was one available between the medium and large size, especially for cold food storage. I think they are an exceptional cooler.